Windows
French Doors
Patio Doors
Front Doors
Roller Shutters
Window Sills
The specified Uw values refer to the sample size. The sample size refers to a single-sash window with a width of 1230mm and a height of 1480mm. All Uw values from German manufacturers are determined using this window size. As the window gets smaller, the Uw value goes down accordingly. For larger windows, the Uw value generally improves. Please note that the warm edge (thermally separated edge seal) is required to receive funding from the KfW (Reconstruction Loan Corporation). The specified Uw values also apply to parallel slide & tilt doors; since the dimensions of a parallel slide & tilt door are larger than those of the sample window size, better Uw values will be achieved.
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.1 | 1.3 | 1.3 |
| 1.0 | 1.1 | 1.3 | 1.2 |
| 0.7 | 1.1 | Not possible for this system. | Not possible for this system. |
| 0.6 | 1.1 | Not possible for this system. | Not possible for this system. |
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.2 | 1.4 | 1.3 |
| 1.0 | 1.2 | 1.3 | 1.2 |
| 0.7 | 1.2 | Not possible for this system. | Not possible for this system. |
| 0.6 | 1.2 | Not possible for this system. | Not possible for this system. |
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.5 | 1.5 | 1.4 |
| 1.0 | 1.5 | 1.4 | 1.3 |
| 0.7 | 1.5 | Not possible for this system. | Not possible for this system. |
| 0.6 | 1.5 | Not possible for this system. | Not possible for this system. |
Classic IV 68 - profile section
Rustikal IV 68 - profile section
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.1 | 1.3 | 1.2 |
| 1.0 | 1.1 | 1.2 | 1.1 |
| 0.7 | 1.1 | 1.0 | 0.9 (0.93) |
| 0.6 | 1.1 | 1.0 (0.95) | 0.9 (0.87) |
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.2 | 1.3 | 1.2 |
| 1.0 | 1.2 | 1.2 | 1.2 |
| 0.7 | 1.2 | 1.1 | 1.0 (0.97) |
| 0.6 | 1.2 | 1.0 (0.99) | 0.9 (0.91) |
| Glass Ug value W/(m²k) | Frame Uf value W/(m²k) | Window Uw value insulating glass edge seal aluminium W/(m²k) | Window Uw value insulating glass edge seal uPVC W/(m²k) |
|---|---|---|---|
| 1.1 | 1.5 | 1.4 | 1.3 |
| 1.0 | 1.5 | 1.3 | 12 |
| 0.7 | 1.5 | 1.2 | 1.1 |
| 0.6 | 1.5 | 1.1 | 1.0 |
Classic IV 78 - profile section
Rustikal IV 78 - profile section
With a parallel slide & tilt door made of wood, the Uw values are calculated using the individual U values of each window frame and glazing, as well as the heat loss along the edge of the glass. For the sake of comparison, a standard window size of 1230 x 1480 mm is usually used for the calculation, but it can generally be assumed that a larger window will result in a lower value.
A thermally separated edge seal along the insulating glass - the so-called "warm edge" - further improves the thermal insulation of the entire door.
The heat transfer coefficient of a parallel slide & tilt door made of wood determines whether a parallel slide & tilt door can be classified as suitable for passive houses and also whether funding from the KfW is possible. Energy savings not only protect the environment, they also make an immediate difference on your energy bill.
The difference between a Uw value of 3.5 and a value of 0.83 can make a difference of more than 1000 litres of heating oil per year for an area of 30 m².